June 15, 2020

Resin printers work by curing liquid resin with light as it builds your model layer by layer. There are several technologies that fall into this category.  Some use a laser, some use UV light and a projector, others like the Longer Orange uses UV light and an LCD scree...

April 19, 2020

If you know what you're doing, here is the Fusion 360 file.   Have fun.

If you'd like some guidance (highly recommended), read below.

If you're looking to be more efficient in 3D printing the 3DVerkstan face shield then you'll want to stack them.  However, there are...

December 13, 2019

They really do get excited about these gifts.   One year I designed and 3D printed a gift box and put the “real” gift inside the gift box.   I had a hard time getting them to even open the gift box because that was the part they were most thrilled with.

November 28, 2019

With the lack of complex curves, even beginners in Fusion 360 can design the new Tesla Cybertruck. Check out the video to see how to approach your own design.

January 26, 2019

When used correctly, sketch constraints can really speed up your workflow.  However, sometimes they can get in the way and really slow you down as you consistently have to pause your flow to address that dreaded over constrain-error 😱.  Check out my three tips to avoi...

December 24, 2018

Add some character to your Christmas tree this year with a 3D printed 8 bit star tree topper.  Follow along as I show you how simple it is to design the star in Fusion 360. I’ve also provided a link to the STL file here so that you can print my model and compare it wit...

December 13, 2018

The most wonderful time of the year can be made even more wonderful by designing and 3D printing your own ornaments.  I’ll show you how you can easily design the ornament in the picture using Fusion 360. After going through the steps below, make sure to watch the video...

November 23, 2018

It’s one of those underrated tools that you’re probably not using but continue reading and you’ll see why you need to start taking advantage of the Web tool in Fusion 360.  The Web tool provides a quick and super efficient way to add cross braces to your designs for in...

November 12, 2018

When I first started using Fusion 360, one of my favorite features was the ease of going from 3D model to 3D printing.  No other software provided a smoother workflow. It’s very straightforward to do if your model contains only one body. However, if you are trying to e...

November 4, 2018

The sculpting environment can be a bit intimidating but once you get the hang of it it’s actually quite fun to use. Learning to combine the sculpting and modeling environment in Fusion 360 will open up an entire world of new designs you’ll be able to make. I’ve include...

Please reload

Recent Posts